Paint protective sealant

Fusion Tough Coat can be applied over Fusion paint, milk paint, or other water-based matte paints. It is abrasion and stain resistant and provides additional protection. Formulated with premium-quality resins, it does not yellow over time.

Use for high-traffic surfaces such as kitchen tables, chairs, kitchen cabinets, doors, and in areas with high humidity like spas, bathrooms, or walls behind stoves. The Tough Coat makes it easier to maintain surfaces painted with Fusion Mineral Paint or Milk Paint.

Preparation: Wait 24 to 36 hours after paint application before using the Tough Coat. Mix the product well before use. Let it sit for 20 minutes before applying to allow air bubbles to dissipate. The surface must be clean and free of dust, wax, and oil. Application: Apply with a brush or roller. The milky appearance disappears as it dries. Allow 4 hours between coats. To improve adhesion, you can lightly sand with 220-grit sandpaper between coats. 500ml

Coverage: Approximately 75 sq. ft. / 500ml

SKU: Fusio-sce-prot-l-500